[BW3040 SERIES] - Non-Magnum Suppressors

   The SUS-TAC BW3040 Series Suppressors utilize an extremely efficient internal design to provide maximum possible suppression and recoil. They are produced to effectively reduce sound pressure within a minimal size housing. The SUS-TAC BW3040 Series are non-reflex suppressors which attach to the end of the barrel with a screw thread. The units are available in virtually any thread.

SUS-TAC's BW3040 Series suppressors pass, and with the performance models even exceed, the US Military Specification for hearing safe operation (without any hearing protection) by up to as much as 10dB.


BW3040 SERIES FEATURES
  • Lightweight outer housings manufactured from aircraft grade aluminium
  • Accurate, and in some cases improved, shot groupings
  • CNC precision machined billet parts for tighter tolerances
  • Stainless steel Internals for higher abrasion resistance
  • Optional Titanium or Aluminium internals for further weight saving
  • Attractive exterior styling with CeraKote for protection
  

Scroll down for details...
Scroll down for details...
Scroll down for details...



GENERAL SPECIFICATIONS 
Indexable Recoil Break  :    No
Housing Material  :    Aircraft Grade Aluminium
Finish  :    CeraKote: Black, Grey, Tan, Olive Green
Diameter  :    40mm (1.57") OD
Barrel Connection  :    Threaded.  Click for Details
   
OPTIONS
Titanium Option  :    Titanium Internals (Replaces Stainless Steel)
 Titanium Weight  :    +-20% Saving  (0.00lb)  (0.00oz)
 



 
 

BW3040 LONG

The SUS-TAC BW3040BR-LONG is our flagship model. This design is a no compromise performance orientated suppressor. With the cone count increased by 40% over the standard version, this suppressor reduces sound pressure by an impressive 33+ dB(C).

Added to this is that any time the gun is not fired for approximately 5 to 10 minutes any suppressor will fill with fresh air (containing oxygen) and cause a "First Round Pop" or "FRP" to occur. Most silencer designs suffer from a FRP of up to 10 dB louder than subsequent shots. The advantage of this silencer is that it almost completely removes the "FRP" effect. This is important as this can effect the user in many situations such as when hunting or in shooting competitions between rounds as the FRP will in most cases not be hearing safe. Not with this suppressor!!! 
BW3040 LONG SPECIFICATIONS 
Caliber Range  :    .223 - .300 
Sound Reduction  :    +-32 dB(C)
Recoil Reduction  :    +-41%
Internals  :    Stainless Steel
Length  :    244mm Long
 SS Weight  :    +-501g  (0.00lb)  (0.00oz)
 
 




 
 

BW3040 STANDARD

The SUS-TAC BW3040 STANDARD is a very versatile suppressor as it has a good compromise between size and weight, and performance.

With this combination the user recieves the benefit of significant sound suppression and improved recoil with only a moderate weight being added to the rifle.
BW3040 STANDARD SPECIFICATIONS 
Caliber Range  :    .223 - .300
Sound Reduction  :    +-28 dB(C)
Recoil Reduction  :    +-29%
Internals  :    Stainless Steel
Length  :    202mm Long
 SS Weight  :    +-441g  (0.97lb)  (15.5oz)
 
 




 
 

BW3040 ALUMINIUM CONES

The SUS-TAC BW3040AC is for people who are looking for the lightest possible suppressor. This suppressor has exactly the same performance characteristics as the BW3040 STANDARD, but the internals have been swapped to aluminium. This provides a significant weight saving by being the lightest suppressor in the range. This comes at the expense of reduced durability.

These suppressors are designed to be factory serviceable and should be done at recommended intervals. Luckily is it cheap to purchase if replacement parts on this model, if required.
BW3040AC STANDARD SPECIFICATIONS 
Caliber Range  :    .223 - .300
Sound Reduction  :    +-28 dB(C)
Recoil Reduction  :    +-29%
Internals  :    Aircraft Grade Aluminium
Length  :    202mm Long
 SS Weight  :    +-342g  (0.00lb)  (0.00oz)
 
 




 
 

BW3040 SHORT

The SUS-TAC BW3040 SHORT is the most compact suppressor in the SUS-TAC BW3040 range, 42mm shorter than the standard version. When space saving is your main goal and you require the shortest possible suppressor, this is the suppressor to choose.

With this design the added length to your rifle is a mere +-145mm. Being so small in size, it is a few dB louder than the other models, but is still a very capable and impressive suppressor.

It is also a very light suppressor due to its small size.

BW3040 SHORT SPECIFICATIONS 
Caliber Range  :    .223 - .300
Sound Reduction  :    +-24.5 dB(C)
Recoil Reduction  :    +-20%
Internals :    Stainless Steel
Length  :    160mm Long
 SS Weight  :    +-388g  (0.00lb)  (0.00oz)