[BW3045BR SERIES] - MAGNUM  Suppressors



The SUS-TAC BW3045BR Series Suppressors are a modular suppressor which has an integral Recoil Brake added to the front of it. The SUS-TAC Recoil Brake is a clever design as it reduces recoil significantly without increasing the dB reading. This has been tested numerous times and we found that this design does not increase the dB's when compared to shooting without the recoil brake.

The larger volume selected along with the extremely efficient internal design used allows this suppressor to to maintain SUS-TAC's high suppression standards with large calibers or calibers with high power loads, such as a .338 Lapua Mag, .375 CheyTac, .375 RUM and .458 WinMag to name a few. 

SUS-TAC's BW3045BR Series suppressors pass, and with the performance models even exceed, the US Military Specification for hearing safe operation (without any hearing protection) by up to as much as 10dB.

The SUS-TAC BW3045BR Series are non-reflex suppressors which attach to the end of the barrel with a screw thread. The units are available in virtually any thread.

  • Significantly reduced recoil with the integral brake
  • Modular design allows user to easily remove and re-install the recoil brake at any point
  • Accurate, and in some cases improved, shot groupings
  • CNC precision billet machined parts for tighter tolerances
  • Stainless steel Internals for higher abrasion resistance
  • Optional Titanium or Aluminium internals for extra weight savings
  • Attractive exterior styling with CeraKote for protection

Scroll down for details...

Scroll down for details...
Scroll down for details...

Indexable Recoil Brake  :    Yes, Removable Modular Design
Housing Material  :    Aircraft Grade Aluminium
Finish  :    CeraKote: Black, Grey, Tan, Olive Green
Diameter  :    45mm (+-1.75") OD
Barrel Connection  :    Threaded.  Click for Details
Titanium Option  :    Titanium Internals (Replaces Stainless Steel)
 Titanium Weight  :    +-25% Saving  (0.00lb)  (0.00oz)




The SUS-TAC BW3045BR-LONG is our flagship model. This design is a no compromise performance orientated suppressor. With the cone count increased by 40% over the standard version, this suppressor reduces sound pressure by an impressive 33+ dB(C). Recoil is also reduced by a staggering 57% making for a very pleasurable shooting experience.

Added to this is that any time the gun is not fired for approximately 5 to 10 minutes any suppressor will fill with fresh air (containing oxygen) and cause a "First Round Pop" or "FRP" to occur. Most silencer designs suffer from a FRP of up to 10 dB louder than subsequent shots. The advantage of this silencer is that it almost completely removes the "FRP" effect. This is important as this can effect the user in many situations such as when hunting or in shooting competitions between rounds as the FRP will in most cases not be hearing safe. Not with this suppressor!!! 
Caliber Range  :    .223 - .300 
Sound Reduction  :    +-33.5 dB(C)
Recoil Reduction  :    +-57%
Internals  :    Stainless Steel
Total Length  :    317mm Long
Length Added to Gun  :    302mm Long
 SS Weight  :    +-565g  (824lb)  (0.00oz)
 TS Weight  :    +-495g  (0.00lb)  (0.00oz)
 TI Weight  :    +-452g  (0.00lb)  (0.00oz)



The SUS-TAC BW3045BR STANDARD is a very versatile suppressor as it has a good compromise between size and weight, and performance. With this combination the user recieves the benefit of significant sound suppression and improved recoil with only a moderate weight being added to the rifle.

Accuracy is generally improved due to a few factors. One of the factors noticed is because the recoil is reduced so much it reduces the tendency to "flich" when pulling the trigger.
Caliber Range  :    .223 - .300
Sound Reduction  :    +-30 dB(C)
Recoil Reduction  :    +-54%
Internals  :    Stainless Steel
Total Length  :    275mm Long
Length Added to Gun  :    260mm Long
 SS Weight  :    +-507g  (705lb)  (0.00oz)
 TS Weight  :    +-453g  (0.00lb)  (0.00oz)
 TI Weight  :    +-403g  (0.00lb)  (0.00oz)



The SUS-TAC BW3045BR-AC is for people who are looking for the lightest possible suppressor. This suppressor has exactly the same performance characteristics as the BW3045BR STANDARD, but the internals have been swapped to aluminium. This provides a significant weight saving by being the lightest suppressor in the range. This comes at the expense of reduced durability.

These suppressors are designed to be factory serviceable and should be done at recommended intervals. Luckily is it cheap to purchase if replacement parts on this model, if required.
Caliber Range  :    .223 - .300
Sound Reduction  :    +-30 dB(C)
Recoil Reduction  :    +-54%
Internals  :    Aircraft Grade Aluminium
Total Length  :    275mm Long
Length Added to Gun  :    0mm Long
 SS Weight  :    +-536g  (0.00lb)  (0.00oz)
 TS Weight  :    +-0g  (0.00lb)  (0.00oz)
 TI Weight  :    +-0g  (0.00lb)  (0.00oz)