[BW3045 SERIES] - MAGNUM Suppressors

   The SUS-TAC BW3045 Series Suppressors are our larger volume version capable of suppressing large caliber or calibers with very powerful loads. The larger volume selected along with the extremely efficient internal design used allows this suppressor to to maintain SUS-TAC's high suppression standards with these difficult calibers.

SUS-TAC's BW3045 Series suppressors pass, and with the performance models even exceed, the US Military Specification for hearing safe operation (without any hearing protection) by up to as much as 10dB lower. 

The SUS-TAC BW3045 Series are non-reflex suppressors which attach to the barrel with a screw thread, available in virtually any thread size.


BW3045 SERIES FEATURES
  • Lightweight outer housings manufactured from aircraft grade aluminium
  • Accurate, and in some cases improved, shot groupings
  • Large internal volumes to handle high power calibers
  • Stainless steel Internals for higher abrasion resistance
  • Optional Titanium or Aluminium internals for further weight saving
  • Attractive exterior styling with CeraKote for protection
  


Scroll down for details...
Scroll down for details...
Scroll down for details...



GENERAL SPECIFICATIONS 
Indexable Recoil Break  :    No
Housing Material  :    Aircraft Grade Aluminium
Finish  :    CeraKote: Black, Grey, Tan, Olive Green
Diameter  :    45mm (+-1.75") OD
Barrel Connection  :    Threaded.  Click for Details
   
OPTIONS
Titanium Option  :    Titanium Internals (Replaces Stainless Steel)
 Titanium Weight Saving  :    +-25% Saving 
 



 
 

BW3045 LONG

The SUS-TAC BW3045BR-LONG is our flagship model. This design is a no compromise, performance orientated suppressor. With the baffle count increased by 40% over the standard version, this suppressor reduces sound pressure by an impressive 33+ dB(C).

The capabilities of this suppressor extends to large calibers with high power loads, such as a .338 Lapua Mag, .375 CheyTac, .375 RUM and .458 WinMag to name a few. 

Any time the gun is not fired for approximately 5 to 10 minutes any suppressor will fill with fresh air (containing oxygen) and cause a "First Round Pop" or "FRP" to occur. Most silencer designs suffer from a FRP of up to 10 dB louder than subsequent shots. The advantage of this silencer is that it almost completely removes the "FRP" effect. This can effect the user in situations such as when hunting or in shooting competitions as the FRP will in most cases not be hearing safe. Not with this suppressor!!! 
BW3045 LONG SPECIFICATIONS 
Caliber Range  :    .223 - .300 
Sound Reduction  :    +-33.5 dB(C)
Recoil Reduction  :    +-48%
Internals  :    Stainless Steel
Length  :    244mm Long
 SS Weight  :    +-674g  (1.48lb)  (23.7oz)
 Titanium Weight  :    +-443g  (0.97lb)  (15.6oz)
 
 




 
 

BW3045 STANDARD

The SUS-TAC BW3045 STANDARD is a very versatile suppressor as it has a good compromise between size and weight, and performance.

With this combination the user recieves the benefit of significant sound suppression and improved recoil with only a moderate weight being added to the rifle.
BW3045 STANDARD SPECIFICATIONS 
Caliber Range  :    .223 - .300
Sound Reduction  :    +-28 dB(C)
Recoil Reduction  :    +-29%
Internals  :    Stainless Steel
Length  :    202mm Long
 SS Weight  :    +-582g  (1.28lb)  (20.5oz)
 Titanium Weight  :    +-400g  (0.88lb)  (14.1oz)
 
 




 
 

BW3045 ALUMINIUM CONES

The SUS-TAC BW3045AC is for people who are looking for the lightest possible suppressor. This suppressor has exactly the same performance characteristics as the BW3045 STANDARD, but the internals have been swapped to aluminium. This provides a significant weight saving by being the lightest suppressor in the range. This comes at the expense of reduced durability.

These suppressors are designed to be factory serviceable and should be done at recommended intervals. Luckily is it cheap to purchase if replacement parts on this model, if required.
BW3045AC STANDARD SPECIFICATIONS 
Caliber Range  :    .223 - .300
Sound Reduction  :    +-28 dB(C)
Recoil Reduction  :    +-29%
Internals  :    Aircraft Grade Aluminium
Length  :    202mm Long
 SS Weight  :    +-408g  (0.90lb)  (14.4oz)
 Titanium Weight  :    Not Applicable